Disassembly and Reassembly
294 Samsung Electronics
No Parts Procedure Remark
1 CABINET 10) Loosen the CONDUIT from ASSY CONTROL
COOLER IN lower part and then separate the
TEMP SENSOR.
11) Loosen the CONDUIT from ASSY CONTROL
COOLER IN lower part and then separate the
TEMP SENSOR.
12) Replace of REACTOR and FAN is available
after remove the ASSY CABI LF.
13) When need CONDUIT control for tempera-
ture sensor : Remove the 4 screws in ASSY
CONTROL COOLER side.
To Next Page
Loading...