Disassembly and Reassembly
298 Samsung Electronics
No Parts
Procedure Remark
1 PANEL-FRONT
(Continues)
4) Cover Panel is fixed to body by Hook in cen-
ter area and side area.
5) Separate the hook after pushing both end of
Cover Panel as shown in the figure.
(Watch out for the damage of the hook)
6) Raise front part upward obliquely as shown
in the figure and then remove the hooks.
Center area
Side area
Side area
HOOK
015/022/028/
036/045
056/071/082
To Next Page
Loading...