Disassembly and Reassembly
308 Samsung Electronics
No Parts
Procedure Remark
1 PANEL-FRONT
(Continues)
5) The GRILLE INLET is fixed to body by hooks
in the center and side area.
6) Separate the hook pulling end of the
GRILLE INLET as shown in figures.(Watch
out for the damage of hooks)
7) To detach the PANEL FRONT from the main
frame, unfasten 2 screws at the bottom. (use
(+) Screw Driver)
8) To detach the PANEL FRONT from the main
frame, loosen 4 hook structures. When
separate the hooks: pull out each ribs near
the hooks as shown in figures. (Watch out
for the damage of hooks)
To Next Page
Loading...