Samsung AM071NN1DEH/TK - Page 35

35
English
Installation Procedure
IAdditional information on SEG 3, 4, 5, 6, 8, 9
When SEG 3 is set to 1 and the HR-specific auto changeover function is run, the indoor unit operates as shown in the
following figure:
C
Temperature
b
d
c
A
D
B
a
Ts
Set temperature
for Auto mode
Reference
temperature for
cooling
Reference temperature for heating
Reference temperature for change from
heating to cooling
Reference temperature for
cooling
Cooling thermo off Cooling thermo on Heating thermo off Heating thermo on
A: Set with SEG4 (˚C)
B: Set with SEG5 (˚C)
C: Set with SEG6 (˚C)
D: Set with SEG8 (˚C)
The mode change between the Cool and Heat modes is made only when the thermo off state is maintained for the
period of time set with SEG9.
DVM TK Wind-Free 1way IM EN_DB68-07553A-00.indb 35 2017-12-01 오후 2:19:10