Disassembly and Reassembly
18 Samsung Electronics
No. Parts Procedure Remark
8 Fan Propeller 1)
Remove nut, take out the fan.
(using wrench turn clockwise)
9 Motor 1)
Remove 4 screws, take off the motor.
(using "+" screw driver)
2)
Pull out the connector on main pcb board.
10 Bracket motor 1)
Remove 2 screws to take off bracket cond.
(using "+" screw driver)
2)
Remove 2 screws on the base.
(using "+" screw driver)
To Next Page
Loading...
