Need help?Do you have a question about the Samsung DVM S ECO AM080MXMDGH and is the answer not in the manual?
General| Model | AM080MXMDGH |
|---|---|
| Type | DVM S ECO |
| Cooling Capacity | 8.0 kW |
| Heating Capacity | 9.0 kW |
| Power Source | Electric |
| Refrigerant | R410A |
| Operating Temperature (Heating) | -15°C to 24°C |
Guidelines for choosing the optimal installation location for the outdoor unit.
Steps and warnings for installing the outdoor unit on its base.
Guidelines for refrigerant pipe length, height difference, and installation.
Procedure to calculate the total additional refrigerant needed for the system.
Important safety information and procedures for refrigerant pipe brazing.
Specifications for circuit breakers and power cables for the DVM S ECO Series.
Diagrams illustrating the power wiring for 3-phase and 1-phase systems.
Instructions and standards for installing grounding wires for safety.
Procedure for performing an air tightness test using Nitrogen gas.
Steps for vacuum drying refrigerant pipes and indoor units.
Safety precautions and procedures to follow before starting test operation.
A checklist of items to verify before performing auto trial operation.
Steps and considerations for performing and completing auto trial operation.
Troubleshooting steps for E503 errors, including valve and refrigerant checks.
Procedure for detecting the system's refrigerant amount automatically.
To Next Page