Need help?Do you have a question about the Samsung DVM S AM080FXVAGH and is the answer not in the manual?
General| Model | AM080FXVAGH |
|---|---|
| Cooling Capacity | 8.0 kW |
| Heating Capacity | 9.0 kW |
| Refrigerant | R410A |
| Fan Motor Output | 60 W |
| Fan Motor Speed (Cooling) | 850 rpm |
| Indoor Unit Type | Ducted |
| Refrigerant Control | Electronic Expansion Valve |
| Fan Motor Type | DC Motor |
| Operating Temperature (Heating) | -15 ~ 24 °C |
General safety warnings and cautions for installation and usage.
General guidelines and tools for refrigerant pipe installation.
Guidance on selecting the correct refrigerant pipe size based on capacity.
Safety information and procedures for refrigerant pipe welding.
Procedures and tool usage for cutting and flaring refrigerant pipes.
MCU specifications and how to install them for indoor unit connection.
Examples for calculating refrigerant amounts for HP and HR models.
Specifies circuit breaker and power cable ratings based on model capacity.
Diagram showing how to route power and communication cables.
Wiring examples for connecting MCUs to outdoor and indoor units.
Power wiring diagram for 3-phase 4-wire supply.
Power wiring diagram for single-phase 2-wire supply.
Steps for performing an air tightness test using nitrogen gas.
Process for vacuum drying refrigerant pipes and indoor units.
Safety precautions and preparation steps before conducting test operations.
Step-by-step guide for performing the auto trial operation.
Steps for detecting the amount of refrigerant in the system.
To Next Page