Need help?Do you have a question about the Samsung DVM S AM180FXVAGR and is the answer not in the manual?
General| Category | Air Conditioner |
|---|---|
| Cooling Capacity | 18.0 kW |
| Heating Capacity | 20.0 kW |
| Refrigerant | R410A |
| Model | AM180FXVAGR |
| Power Supply | 380-415V, 3Phase, 50Hz |
| Operating Temperature Range (Cooling) | -5°C to 46°C |
| Operating Temperature Range (Heating) | -15°C to 24°C |
| Indoor Unit Net Weight | Varies by indoor unit model |
| Indoor Unit Dimensions (WxHxD) | Varies by indoor unit model |
| Maximum Number of Connected Indoor Units | 16 units |
| Sound Pressure Level (Indoor Unit) | Varies by indoor unit model (typically 25-45 dB) |
Details factors for choosing an optimal and safe installation location for outdoor units.
Outlines requirements for constructing a stable and secure base for outdoor unit installation.
Covers essential procedures, tools, and compatibility for refrigerant pipe installation.
Details how to calculate additional refrigerant based on unit capacity and pipe size/length.
Specifies maximum allowable lengths and height differences for H/P refrigerant piping.
Details MCU specifications, capacity, and internal EEV status for system integration.
Lists required MCA and MFA ratings for circuit breakers and power cables by model.
Provides diagrams for 3-phase and single-phase power supply and cable connections.
Specifies requirements for grounding power cables based on installation location and voltage.
Outlines steps for performing an air tightness test using nitrogen gas to check for leaks.
Describes the process of vacuum drying pipes using a vacuum pump and checking for moisture.
Lists essential checks like insulation resistance and voltage before supplying power.
Provides a comprehensive checklist covering outdoor/indoor units, pipes, wiring, and settings.
Outlines precautions and a checklist to prepare for inspection and test operations.
Details the steps for auto trial operation, including checks and error handling.
To Next Page