Need help?Do you have a question about the Samsung DVM S AM160FXVAGR and is the answer not in the manual?
General| Model | AM160FXVAGR |
|---|---|
| Cooling Capacity | 16.0 kW |
| Heating Capacity | 18.0 kW |
| Refrigerant | R410A |
| Power Supply | 380-415V, 3Ph, 50Hz |
| Indoor Unit Compatibility | Various indoor units |
Details how to combine different outdoor units and their specifications.
Illustrates the process of constructing the base ground, including draining pits and leveling.
Shows the dimensions and positions for mounting the outdoor unit and anchor bolts.
Details essential guidelines for refrigerant pipe work, such as length, height difference, and pressure.
Guides on selecting the correct refrigerant pipe size based on capacity and length.
Provides crucial safety information and precautions for welding refrigerant pipes.
Details the correct methods and tools for cutting and flaring refrigerant pipes, including safety warnings.
Guides on how to correctly connect flared pipes, including torque specifications and oil application.
Provides MCU specifications, including connection capacity and internal EEV status.
Lists MCA and MFA ratings for circuit breakers and power cables based on outdoor unit models.
Warns about installing ELCB/MCCB+ELB, handling cables, and selecting power cables.
Illustrates the power wiring configurations for 3-phase systems, including module combinations.
Provides a table and guidelines for grounding the power cable based on humidity and voltage conditions.
Details the steps for performing an air tightness test using nitrogen gas, including pressure checks and leak detection.
Describes the process of vacuum drying refrigerant pipes and indoor units, including using vacuum pumps and checking for leaks.
Explains how to set MCU addresses and configure MCU ports using DIP switches.
Lists important safety precautions to follow before commencing test operations to prevent damage or injury.
Explains the procedure and expected outcomes of the auto trial operation for system verification.
Provides a flowchart for troubleshooting E503 errors, guiding through corrective actions.
Offers a troubleshooting guide for E505 and E506 errors, focusing on pressure sensors and valves.
Lists corrective actions based on the results of the refrigerant amount detection check.
To Next Page