Need help?Do you have a question about the Samsung AM160FNBDEH and is the answer not in the manual?
General| Phase | 1 |
|---|---|
| Refrigerant | R410A |
| Voltage (V) | 208-230 |
| Energy Efficiency Ratio (Heating) | 9.5 HSPF |
| Energy Efficiency Ratio (Cooling) | 16 SEER |
| Power Supply | 208/230V, 1 Phase |
Highlights crucial safety warnings and cautions for installation and operation.
Specifies compatible combinations for indoor and outdoor units.
Covers installation tools, supplied/additional accessories, and strainer specs.
Guidelines for selecting location and required space around the unit.
Instructions for preparing the base, anchoring, and installing units.
Provides physical dimensions for the DVM Hydro unit and Hydro Unit HT.
Covers pipe handling, required tools, welding safety, and nitrogen flushing.
Details on connecting refrigerant pipes to the DVM Hydro Unit HT.
Procedures for leak testing and insulating refrigerant pipes.
Steps for installing the drain pipe and checking for water leaks.
Covers system diagram, hot water, floor heating, and component specs.
Discusses water quality standards and factors affecting corrosion/scale.
Important considerations for water pipe installation, including freezing and circulation.
Details wire specs, system layout, and cable configuration.
How to connect power terminals and apply correct torque.
Overview of connections, diagrams, and terminal functions.
Instructions for connecting water pumps and booster heaters to the terminal block.
Steps for connecting 3-way valves and their initial settings.
Instructions for connecting a 2-way valve to the terminal block.
How to connect AC 230V/24V thermostats and their wiring diagrams.
Instructions for connecting water tank temperature sensors and flow switches.
Procedures for installing a ground rod and wire for electrical safety.
Steps for option setting and detailed guide for SEG options.
Verifying and inputting set options, and checking operation.
Assigning unit addresses and setting 02 series installation options.
Detailed breakdown of 05 series installation options.
How to modify individual digits within set options.
Maintaining water quality, managing flow, and cleaning heat exchangers.
How error indications are displayed on the remote controller.
Lists error codes, explanations, and provides a system diagram.
Procedures for using the PCB switch to check unit info and errors.
Final installation checks and guidance for explaining unit functions to the user.
Table listing models with their net weight and dimensions.
To Next Page