Need help?Do you have a question about the Samsung AM140AXVDGH/EU and is the answer not in the manual?
Describes the powerful performance and space-saving design of the outdoor units.
Defines CR and outlines allowable limits and risks for system combination ratios.
Details CR limits for heating to avoid abnormal sound levels, considering operation ratio.
Details the step-by-step process for selecting outdoor and indoor units.
Presents electrical wiring diagrams for different outdoor unit models.
Illustrates the refrigerant piping layout for different outdoor unit configurations.
Provides guidelines for selecting an optimal installation location for the outdoor unit.
Specifies the required clearances around the outdoor unit for ventilation and maintenance.
Lists necessary materials and tools required for installing the outdoor unit.
Details the construction methods and dimensions for the base ground.
Provides cautions for connecting anchor bolts to prevent corrosion and ensure secure mounting.
Outlines maximum allowable lengths for refrigerant pipes in various installation scenarios.
Explains how to calculate and add refrigerant based on pipe length and unit capacity.
Lists the amount of additional refrigerant needed for various indoor unit types and capacities.
Provides examples for calculating total refrigerant amounts for HP and HR models based on pipe length and indoor units.
Outlines maximum allowable lengths for refrigerant pipes in various installation scenarios.
Illustrates power wiring diagrams for module combinations and single-phase/three-phase supplies.
Specifies the correct positioning and mounting of anchor bolts for the outdoor unit base.
Provides guidance on allowable refrigerant pipe lengths and installation configurations for H/P systems.
Specifies maximum allowable height differences for refrigerant pipes between units.
Covers base preparation, mounting, and anchor bolt positioning for outdoor units.
Details the proper routing and securing of power and communication cables.
To Next Page
General