EasyManua.ls Logo

Samsung AM120AXVDGH/EU User Manual

Samsung AM120AXVDGH/EU
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Model : Essential Type
VRF
Technical
Data Book
DVM S2 for Europe
(R410A, 50Hz, Essential)
Question and Answer IconNeed help?

Do you have a question about the Samsung AM120AXVDGH/EU and is the answer not in the manual?

Samsung AM120AXVDGH/EU Specifications

General IconGeneral
TypeHeat Pump
Power Supply220-240V, 50Hz
Operating Temperature Range (Heating)24°C
Operating Temperature Range (Cooling)46°C
Dimensions (Outdoor Unit)780 x

Summary

Design Procedure & Combination Ratio

Heating Operation Sound Level Limits

Outlines CR limits and conditions to prevent abnormal sound levels during heating operation.

Specification

Electric Characteristics

Electrical Wiring Diagrams

Outdoor Unit Electrical Connections

Illustrates the internal wiring schematic, component connections, and power supply layout for the outdoor unit.

Operation Range

Piping Diagram

Outdoor Unit Refrigerant Flow

Depicts the path of refrigerant through the outdoor unit's components, including sensors and valves.

Installation

Outdoor Unit Location Selection

Provides guidelines for choosing an optimal site, considering ventilation, noise, and environmental conditions.

Pipe Installation for an Outdoor Unit

Details the correct methods for installing refrigerant pipes, including connection to the outdoor unit and precautions.

Additional Refrigerant Calculation

Explains how to calculate and add refrigerant based on pipe length and indoor units.

Refrigerant Pipe Installation Guide

Covers the process of installing refrigerant pipes, including pipe sizing and additional refrigerant requirements.

Indoor Unit Refrigerant Requirements

Specifies the amount of additional refrigerant needed for each type of indoor unit based on capacity and connection details.

Outdoor Unit Pipe Installation Procedures

Details the correct methods for installing refrigerant pipes, including connection to the outdoor unit and precautions.

Inter-Unit Pipe Installation

Explains how to correctly install refrigerant pipes between multiple outdoor units using branch joints and ensuring proper configuration.

Pipe Connection Methods

Illustrates the correct techniques for connecting refrigerant pipes, including the use of joints and traps, and highlights common errors.

Power and Communication Cable Setup

Provides instructions for safely routing and connecting power and communication cables, including cable selection and protection.

Outdoor Unit Power Wiring Diagrams

Presents wiring diagrams for single-phase and three-phase power supply configurations, including module combinations.

Related product manuals