Need help?Do you have a question about the Samsung AM260HXVAGH/EU and is the answer not in the manual?
General| Brand | Samsung |
|---|---|
| Model | AM260HXVAGH/EU |
| Category | Air Conditioner |
| Language | English |
Details compatibility and capacity ranges for combining indoor and outdoor units.
Covers pipe length, height difference, R-410A pressure, and necessary tools.
Guides on installing branch joints for connecting outdoor units in modules.
Guides on selecting pipe sizes based on outdoor unit capacity and length to branch joints.
Details allowable pipe lengths and installation configurations for H/P systems.
Specifies limits for height differences between outdoor and indoor units.
Details pipe length limits for H/R systems with MCU and Y-joint configurations.
Specifies height difference limits for H/R systems, including notes on PDM kits.
Provides tables for selecting pipe sizes based on outdoor unit capacity and length, including size-up options.
Defines conditions for pipe length and grade increase for H/R systems.
Details pipe sizing between branch joints based on indoor unit capacity for different pipe types.
Explains how to calculate and add refrigerant based on outdoor unit capacity and pipe length.
Provides tables for basic refrigerant amounts based on outdoor unit models.
Lists additional refrigerant amounts per meter based on liquid pipe size.
Shows additional refrigerant amounts per indoor unit based on capacity and model.
Illustrates installation of joints between outdoor units, noting direction and high-pressure gas pipe applicability.
Explains how to calculate total refrigerant by combining pipe length and indoor unit amounts.
Covers MCU specifications and installation of indoor units with MCUs.
Covers safety precautions and procedures for welding refrigerant pipes.
Explains front side and right/left/bottom side connections for pipes.
Provides cautions for welding pipes to outdoor units, including protection and avoiding damage.
Lists MCA and MFA values for High EER single and standard module models.
Lists essential electrical work precautions, including ELCB/MCCB installation and cable handling.
Illustrates power and communication cable routing for module combinations.
Shows power wiring diagrams for 3-phase 4-wire and single-phase 2-wire supplies.
Shows an example connection diagram for MCUs with indoor and outdoor units.
Provides a table for grounding power cables based on installation place and humidity.
Explains how to perform an air tightness test using Nitrogen gas.
Details the process of vacuum drying pipes and indoor units using a vacuum pump.
Explains how to set options using tact switches and interpreting the display.
Lists various optional settings for cooling capacity, heating, current restriction, etc.
Describes the automatic pipe-address setting operation and its requirements.
Lists critical precautions before starting test operations, including power supply timing and touching pipes.
Explains the auto trial operation process, error handling, and user handover.
Provides a flowchart for troubleshooting E503 errors, including checks and corrective actions.
Provides a flowchart for troubleshooting E505 and E506 errors, including pressure sensor checks.
Lists actions for excessive/insufficient refrigerant or supercooling based on detection results.
To Next Page