installing your air conditioner _31
ENGLISH
Setting temperature control of discharge air
1.
Use of “Temperature control of discharge air” or target temperature of discharge air in cooling/heating can be set with the service
mode of a wired remote controller. (Refer to the installation manual of a wired remote controller.)
2.
When using temperature control of discharge air, thermo on/off of Indoor unit is decided by set room temperature and room
temperature, and the temperature of discharge air is adjusted to meet the target temperature of discharge air in thermostat On
section.
3.
When using temperature control of discharge air, the temperature of discharge air cannot always be adjusted to the target
temperature due to external conditions or protective control of the outdoor unit.
❋ Temperature control of discharge air can be set with DMS as well.
To Next Page
Loading...
