What to do if my Samsung Air Conditioner does not work at all?
If your Samsung Air Conditioner isn't working, start by ensuring the power plug is correctly inserted into the wall socket. Then, check whether the circuit breaker is switched off. Also, verify if there is a power failure in your area. Finally, inspect your fuse to confirm that it hasn't blown out.
Why is the remote control not working with my Samsung AM280FNHDEH/EU?
If the remote control isn't operating your Samsung Air Conditioner, first check if the batteries are depleted and replace them if necessary. Then, ensure the batteries are correctly installed. Also, make sure nothing is blocking the remote control sensor. Finally, check for strong lighting apparatus near the air conditioner, as strong light from fluorescent bulbs or neon signs may interrupt the electric waves.
What to do if timer function does not set on Samsung AM280FNHDEH/EU?
Check if you press the Power button on the remote control after you have set the time.
Why does my Samsung AM280FNHDEH/EU not turn on or off with the wired remote control?
Check if you set the wired remote control for group control.
What to do if the wired remote control does not operate on Samsung AM280FNHDEH/EU?
Check if TEST indicator is displayed on the wired remote control. If so, turn off the unit and switch off the circuit breaker. Call your nearest contact center.
Why is no cool or warm air coming from my Samsung Air Conditioner?
Several factors could be at play if cool or warm air isn't coming from your Samsung Air Conditioner. Ensure the set temperature on your remote isn't higher (or lower) than the current room temperature by using the temperature buttons. Check for blockages from dirt in the air filter, cleaning it every two weeks. If recently turned on, the unit may take up to 3 minutes to output cool air to protect the compressor. Direct sunlight exposure, obstacles near the outdoor unit, an overly long refrigerant pipe, or using a cooling-only model or remote in a heating mode can also prevent proper airflow.
Why does the temperature not change on my Samsung AM280FNHDEH/EU Air Conditioner?
If the temperature isn't changing on your Samsung Air Conditioner, check if you've selected Fan mode. If so, press the Mode button on the remote control to select a different mode.
What to do if the indicators of the digital display flashes on Samsung Air Conditioner?
If the indicators on the digital display of your Samsung Air Conditioner are flashing, press the Power button on the remote control to turn the unit off, then switch the circuit breaker off. After a moment, switch the breaker back on.
Why does my Samsung AM280FNHDEH/EU not operate immediately after restarting?
If your Samsung Air Conditioner doesn't operate immediately after being restarted, it's due to a protective mechanism that prevents overloading. The air conditioner will start in approximately 3 minutes.
Why are there odors in the room when my Samsung AM280FNHDEH/EU Air Conditioner is on?
If you are experiencing odors permeating in the room while your Samsung Air Conditioner is running, it could be due to the appliance operating in a smoky area or smells entering from outside. Try operating the air conditioner in Fan mode or open the windows to air out the room.
Details about the big duct type of the air conditioner.
Recommendations for efficient operation and usage tips.
Explains internal protection mechanisms for fault conditions.
Guidance on proper maintenance for extended periods of non-use.
Schedule and type of regular checks for air conditioner upkeep.
Common problems and their solutions for the air conditioner.
Temperature and humidity ranges for efficient air conditioner operation.
Technical details including weight and dimensions of the unit.
Steps and guidelines for installing the indoor unit.
Procedures for leak testing and insulating the system.
Instructions for proper installation of drain pipes and hoses.
Details on connecting drainpipes, with and without a drain pump.
Guide to connecting power and communication cables to the units.
Outlines the general steps to set various configuration options for the unit.
Guide to assigning a unique address to the indoor unit for system management.
Configures unit installation settings based on location and operational needs.
Instructions on how to modify individual digits of the set options.
General| Type | Air conditioner indoor unit |
|---|---|
| Multi-split | - |
| Product color | Gray |
| Gas hose diameter | 22.22 mm |
| Drain hose diameter | 25 mm |
| Liquid hose diameter | 9.52 mm |
| Refrigerating medium | R410A |
| Air conditioner functions | Cooling, Heating |
| Cooling capacity (nominal) | 95500 BTU/h |
| Heating capacity (nominal) | 107500 BTU/h |
| Cooling capacity in watts (max) | 28000 W |
| Heating capacity in watts (max) | 31500 W |
| Cooling capacity in watts (nominal) | - W |
| AC input voltage | 220-240 V |
| Current (cooling) | 5.9 A |
| AC input frequency | 50 Hz |
| Energy efficiency class (cooling) | A |
| Power consumption (cooling) (max) | 790 W |
| Hourly energy consumption (cooling) | - kWh |
| Design load (heating) (Warmer heating season) | - kW |
| Indoor unit type | Ducted |
| Indoor unit depth | 1040 mm |
| Indoor unit width | 1240 mm |
| Indoor unit height | 470 mm |
| Indoor unit weight | 89000 g |
| Indoor units quantity | 1 |
| Indoor unit package depth | 1155 mm |
| Indoor unit package width | 1507 mm |
| Indoor unit package height | 558 mm |
| Indoor unit package weight | 99000 g |
| Cooling airflow (indoor unit) | 65 m³/h |
| Indoor unit sound power level | 79 dB |
| Indoor unit noise level (low speed) | 43 dB |
| Indoor unit noise level (high speed) | 48 dB |
To Next Page
