Disassembly and Reassembly
Samsung Electronics 135
No Parts Procedure Remark
3) Release 2 screws and pull Bottom Discharge
Kit(
ᐙ ) out.
4) Disc onect the Step Motor wire(
ᐚ ) from
the conect wire . This part is right side of the
Bottom Discharge Kit( ᐙ ).
5) Pull Bottom Discharge Kit(
ᐙ ) Out from the
bottom of it.
6) Re lease 3 screws and pull the Evap out from
top to bottom direction.
྅
྆
྅
°
To Next Page
Loading...
