Disassembly and Reassembly
Samsung Electronics 157
No Parts Procedure Remark
7
Fan
&
Motor
1) Turn the hexangular nut attached to the
top of the Fan counterclockwise to remove
it. Take the Fan out of the Motor.
2) Turn the three hexangular nuts on the
Motor counterclockwise to remove the
nuts.
Take
the Motor Wires attached to these
three locations out with your hands prior
to removing the Motor.
8
Evaporator
1) Remove the screws of the Steel Holder
Evaps that are used to fix the Heat
Exchanger, and then remove it. (Use
+Screw Driver)
2) Remove the 2 fixing screws of the Partition
Evap at the Heat Exchanger’s In/Out Pipe.
(Use +S
crew Driver)
To Next Page
Loading...
