ENGLISH-16
Using the air conditioner with the control panel
You can control the air conditioner without the remote controller.
1. Press the On/Off button on the indoor unit control panel.
f The air conditioner will operate in Cool mode.
Stop To turn off the air conditioner, press the
On/Off button again.
2. Press the Mode button to select the operation mode.
f You can select operation mode you want by pressing the Mode button.
f Each time you press the Mode button, the mode will change in order of Auto, Cool,
Dry, Fan and Heat.
3. Press the Temp and button to adjust the temperature.
f You can adjust the temperature within 18 °C ~ 30 °C in Cooling operation and 16 °C
~ 30 °C in Heating operation.
f You can increase/decrease the temperature by 1 °C.
4. Press the Fan Speed button to adjust the fan speed.
f Each time you press the Fan Speed button, the fan speed will change in order of
(Auto) Z (Low) Z (High).
5. Press the Turbo button to select Turbo mode
t General and duct type air conditioners may show different Fan speeds.
NOTE
To Next Page
Loading...
