Disassembly and reassembly
4-5
Samsung Electronics
No Parts Procedure Remarks
9 Motor 1) When the ass’y duct should be separated
from the motor, the 2 bracket should be sepa-
rated first.
2) Then the bolts fixed at the blower and motor
shaft should be separated.
3) Then the screws binding the holder top blow-
er and duct should be separated.
4) The duct of one side should be separated as
the picture shows after loosening the upper
binder.
5) The binder of the motor and the duct should
be separated.
To Next Page
Loading...
