Do you have a question about the Samsung AR5000 and is the answer not in the manual?
Type | Split system |
---|---|
Timer | Yes |
Multi-split | - |
Product color | White |
Built-in display | No |
Refrigerating medium | R410A |
Air conditioner functions | Cooling, Dehumidifying, Heating |
Cooling capacity in watts (max) | 9300 W |
Cooling capacity in watts (min) | 2600 W |
Heating capacity in watts (max) | 12000 W |
Heating capacity in watts (min) | 2200 W |
Cooling capacity in watts (nominal) | 8000 W |
Cooling energy efficiency (EER, W/W) | 3.4 |
Operating temperature (cooling) (T-T) | -10 - 46 °C |
Operating temperature (heating) (T-T) | -15 - 24 °C |
Heating capacity in watts (nominal) (Warmer heating season) | - W |
Heating capacity in watts (nominal) (Average heating season) | 9000 W |
Sustainability certificates | ENERGY STAR |
AC input voltage | 220-240 V |
AC input frequency | 50 Hz |
Design load (cooling) | - kW |
Annual energy consumption (cooling) | - kWh |
Hourly energy consumption (cooling) | 2.35 kWh |
Hourly energy consumption (heating) | 2.65 kWh |
Indoor unit type | Wall-mountable |
Indoor unit depth | 317 mm |
Indoor unit width | 1063 mm |
Indoor unit height | 294 mm |
Indoor unit weight | 14100 g |
Indoor unit noise level (high speed) | 44 dB |
Outdoor unit depth | 375 mm |
Outdoor unit width | 935 mm |
Outdoor unit height | 1128 mm |
Outdoor unit weight | 82000 g |
Outdoor unit noise level | 71 dB |
Key symbols and warnings for safe operation and installation.
How temperature and fan speed adjust during the good'sleep mode cycle.
Steps to set the timer for automatic on/off operations.
Schedule of checks for maintaining the air conditioner's performance.
Key steps and precautions for installing the air conditioner unit.
Requirements and checks for the power supply and circuit protection.
Guidelines for selecting an appropriate location for the indoor unit.
Guidelines for selecting an appropriate location for the outdoor unit.
Guidelines and precautions for electrical connections during installation.
Procedure for removing air and moisture from the indoor unit system.
Steps for installing the drain hose for proper water drainage.
Procedure for removing air from connected pipes before refrigerant charging.
Guidelines for adding refrigerant based on pipe length and model.
Explains error codes and corresponding measures for installer.
Steps for safely removing refrigerant from the system.