Samsung AR5000 - Using the Single User Function

Using the Single User function
Press the Single User button on the remote controller while the air conditioner is
operating in Cool mode.

" " appears on the remote controller display for few seconds and disappears.

Single User indicator and air swing indicator ( ) appear automatically on the remote
controller display.
The air ow blades move up and down.

If the current set temperature is lower than 24°C in Cool mode, it will be automatically
raised to 24 °C.
• SingleUserfunctionisonlyavailableinCoolmode.
• WhenSingleUserfunctionisactivatedinCoolmode,temperaturerangewill
be limited to 24 °C~30 °C.
• Ifthedesiredtemperatureislowerthan24°CinCoolmode,turnotheSingle
User function by pressing the Single User button again.
• Temperature/Fanspeedcanalsobeadjusted(seepage15forinstructions).
• Airowcanbeadjusted.(seepage16forinstruction).
• IfyoupresstheMode button while the Single User function is on, it will cancel
the function.
Press the Single User button once again.Cancel
This function will reduce the energy usage while the air conditioner is operating in Cool mode.
English-21
ADVANCED FUNCTION03
A3050 CB&XL&CH_IB&IM_DB68-04138A_HP&CO_EN.indd 21 2013-12-28 14:43:38