Samsung Electronics
3-2
3-1-2 Key type and functions
3-1-2(a) PANEL key type and functions
Key name Key operating function Key type
On/off Start and end of operation TACT
- ON 1 time = operation start, ON again = operation end.
- No continued operation
Mode selection Change of the operation mode TACT
- Each time the button is pressed(ON), the mode is changed in the following order:
“auto cool fan”(standard=auto)
- No continued operation
Fan speed Setting of the indoor fan motor speed TACT
selection - Each time the button is pressed ON, the mode is changed in the following order:
“low medium high”(standard=high)
Temperature(time) Increase the desired temperature(current time) TACT
setting(up) - Temperature: When pressing the button(ON) one time,
the desired temperature is increased by the unit of 1°C.(18°C- 30°C)
- Time: When pressing the button(ON) one time, the time is increased by 1 minte.
If the “on” button is pressed continuously, the time is increased by 10 minutes.
- One short, and continued operation
Temperature(time) Decrease the desired temperature (current time) TACT
setting(down) - Temperature: When pressing the button(ON) one time,
the desired temperature is decreased by the unit of 1°C. (18°c- 30°C)
- Time: When pressing the button(ON) one time, the time is decreased by 1 minute.
If the “on” button is pressed continuously, the time is decreased by 10 minutes.
- One short, and continued operation
Change of display The temperature and current time can be changed. TACT
- If the “on” key is pressed 1 time, current temperature
and desired temperature are displayed.
- If the “on” key is pressed 1 time, current time is displayed.
* Operating functions
Button for speed selection: When pre s s i n g
the button, the mode is selected in the
o rder of high-medium-low.
Display change button: When the button is pressed, cur-
rent time and temperature are displayed continuously.
Up/down button: It can regulate curre n t
time and desired temperature .
Function selector button: when pressing the button, the mode
can be selected repeatedly in the order of auto-cool-fan.
Convenience re s e rv e
button: It can stop the
operation automatically.
R e s e rve display:
Convenience re s e rv e
operation is perc e i v e d
when ord e red to do so.
Operation display lamp:
When the power is first
applied, the lamp will
blink, but will turn on
when operation begins.
Fan display: The fan is dis-
played in the order of turbo,
high, medium, and low.
Time and temperature display:
C u r rent time, re s e rve time, and
t e m p e r a t u r e are displayed.
Cool display: The door tempera-
t u re is sensed and the button is
lighted when cooling is begun.
Left-right turn
d i s p l a y.
Function selector dis-
play: Current mode of
operation display.
Sensor to perceive re m o t e
c o n t r oller: It can re c e i v e
o r ders from remote contro l l e r . O n / o f f button.
To Next Page
Loading...
