If the atmosphere in your room is stale, you can air the room using
the Fan feature.
1
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
2
If the
is not displayed at the top of the remote control,press the
button on the remote control one or more times until it appears.
Result:
The indoor unit beeps each time you press the button.
The air conditioner runs in the Fan mode.
The temperature is set automatically.
Note
You can change modes at any time.
3
Select the fan speed by pressing the
button one or more times
until the required setting is displayed:
Low
Medium
High
Result:
Each time you press the
button, the indoor unit beeps.
4 To control the direction of the air flow, refer to pages 1
5
.
Airing Your Room
E
-
13
◆
◆
◆
◆
◆
◆
To Next Page
Loading...
Need help?
General
