The On Timer enables you to switch on the air conditioner automatically
after a given period of time. You can set the period of time from 0.5 hour
to 24 hours.
1 To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
2
Press the
button to complete the setting.
Result:
The remaining time is displayed.
Blinking of the timer indicator on the remocon stops.
The selected mode and the temperature on the remocon display
disappear after 10 seconds.
The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On Timer setting.
3
To select an operating mode in advance, press the
button until the
desired mode is displayed at the top of the remote control.
Result:
The air conditioner will run in the selected mode when it is
turned on.
To Cancel the On Timer
If you no longer wish to use the On Timer that you have set, you can
cancel it at any time.
1 To cancel the On Timer, press the
button one or more times until
the timer setting disappears.
2
Press the
button.
Note
If you want to turn on the air conditioner before the timer reaches
the setting time, press the
button.
Setting the On Timer
E
-
16
◆
◆
◆
◆
To Next Page
Loading...
Need help?
General
