J
Julie AyalaAug 14, 2025
How to set fan speed on Samsung Air Conditioner in AUTO or DRY mode?
- Ttaylor08Aug 14, 2025
In DRY mode, the indoor fan speed is fixed at LL. In AUTO mode, the fan speed is automatically selected from 5 steps.
To Next PageTo Next PageHow to set fan speed on Samsung Air Conditioner in AUTO or DRY mode?
In DRY mode, the indoor fan speed is fixed at LL. In AUTO mode, the fan speed is automatically selected from 5 steps.
Why does my Samsung AQ24A2RC Air Conditioner compressor not operate in COOL mode?
The compressor might be experiencing a 3-minute delay upon reoperation or initial power-on. During this delay, the indoor fan automatically adjusts based on the temperature of the blown air.
What to do if the Timer LED is on but the Samsung Air Conditioner won't turn on?
The timer function is likely activated, placing the unit in standby mode. To resolve this, cancel the timer operation, and the unit should operate normally.
Why does my Samsung AQ24A2RC Air Conditioner compressor stop in COOL or DRY mode?
The compressor might be stopping intermittently, or the fan speed decreasing, to prevent the air from freezing inside or outside depending on the air temperature.
Why does the Samsung AQ24A2RC indoor fan and outdoor fan stop in HEAT mode?
In HEAT mode, the compressor operates in a reverse cycle to remove exterior ice. During this process, the indoor and outdoor fans may stop intermittently for up to 20% of the total heating operation time.
Why does the compressor and indoor fan stop in HEAT mode for Samsung AQ24A2RC Air Conditioner?
To protect the compressor from overheating in HEAT mode, the compressor and indoor fan will stop intermittently if the room temperature exceeds the set temperature.
Why does the Samsung Air Conditioner compressor still run after turning it off in HEAT mode?
If the unit is turned off while de-icing is active, the compressor will continue to operate for up to 9 minutes until the de-icing process is completed.
Why does Samsung AQ24A2RC Air Conditioner compressor stop in DRY mode?
In DRY mode, compressor operation is automatically controlled based on the room temperature and humidity levels.
What does blinking STD operation indication LED mean on Samsung AQ24A2RC?
The STD operation indication LED blinks when the indoor unit's power plug is plugged in for the first time. This indicates that power is on. The LED will stop blinking once the operation ON/OFF button on the remote control is pressed.
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Cooling Capacity | 24000 BTU/h |
| Energy Efficiency Ratio (EER) | 10.5 BTU/W-h |
| EER | 10.5 BTU/W-h |
| Indoor Unit Weight | 12.0 kg |
