Samsung AQV12ACME - Page 27

5-5 Set up the Model option
%* If you make the replacement of the ASS’Y CONTROL-IN or MAIN PCB,
Be sure to be set up the model option as follow the steps
Remote controller operation
method
as
per
the
step
Applicable
key
Display status
Ist step
Method)
@ Remove the battery of
remote controller
@® Press the temperature °
raise/down key simulta-
neously
© Insert the battery again
(Result)
If the screen of remocn dis-
plays as shown in the right,
go to the second step
a
2nd step
Method)
If the first digit of LCD is 0
on the remocon screen, go
to the 3rd step.
3 If itis 1, press the mode
key once to change to 0
and go to the 3rd step.
3rd step
Method)
Press the marked key to
input the option number.
example) 021E31
Result}
Go to 4th step if it displays
as shown in the right
(The number increases
from 1~9, and A, b, C, d, E,
F whenever pressing the
key.)
5-10
Samsung Electronics