Samsung Electronics
Disassembly and Reassembly
No Parts Procedure Remark
7) Unlock 3 hooks to fix
Panel Front and
Back-Body.
2 Control-In
(Main PCB)
1) Take all the connector of PCB upper side out.
(Inclusion Power
Cord)
2) Detach the outdoor unit connection wire from
the
Terminal Block.
3) Loosen 4 fixing screws(CCW) of
Ass'y
Control-In. (Use +Screw Driver.)
You can disassembly Ass'y Control In
without evaporator disassembled.
3 Tray Drain 1) Pull Tray Drain out from the Back Body.
4-3
To Next Page
Loading...