Samsung AQV12P Series - Quiet Mode Operation; Activating Quiet Mode; Auto Clean Function; Activating Auto Clean Function

16
Auto clean function will prevent from growing mold by eliminating the moisture inside of the indoor unit. Your indoor unit
evaporates the moisture inside of the unit. Activate this function to provide you with more clean and healthier air.
Press the Auto Clean button.
• Whentheairconditioneristurnedon,theAutocleanfunctionrunsafter
stopping the air conditioner operation.
When the air conditioner is turned o,

The Auto clean indicator on the indoor unit display appears and the Auto cleaning
function runs.
When the air conditioner is turned on,

After stopping the air conditioner operation , the Auto clean indicator on the indoor
unit display appears and the Auto cleaning function runs.
Press the Auto Clean button once again. Cancel
 Auto Cleaning time can vary, depending on the previously used mode.
Auto(cool), Cool, Dry mode:approximately30minutes.
Auto(heat), Heat, Fan mode:approximately15minutes.
Using the Quiet function
You can reduce the noise generated from an indoor unit.
Press the Quiet button on the remote controller while the air conditioner is operating
in Cool/Heat mode.

Quiet indicator appears on the remote controller display.

The indoor unit will operate more quietly.
• Ifusingamultisystem,thisfunctionwillworkonlywhentheQuietfunctionis
set on all operated indoor units.
Press the Quiet button once again.Cancel
Using the Auto Clean function
AQVPE
AQVPA, AQVPB