43
4-4. Outdoor Unit (P)
**24CSDA****
NO. Parts Procedure
Remark
1
Common Work
1)Loosen8xingscrewoneach
sideoftheCabinet-Top.(Use+Screw
Driver)
2
Assy cover
control
1) Unscrew and remove a screw of
Cover-Control.(Use+ScrewDriver)
3 Outdoor and in-
door unit’s power
cable and commu-
nication cable
Caution:
Make sure shutting the power off
supply before disassembling.
1)Unscrew2xscrewsundercable
holders and remove.
2) Get rid of cable tie of communica-
tion cable.
3) Unscrew the numbers of screws
on terminal block and separate
power and communication ‘Ring’
cables from terminal block.
4) Unscrew earth-wire screws and
separate it.