Samsung AR18CSFCMWKNCV - Page 45

45
NO. Parts Procedure Remark
7 Fanpropeller+
Motor
1) Take Fan Propeller apart.
2) Unscrew and remove 4 screws on
MotortotakeapartMotor.(Use+
Screw Driver)
8 ASSY BRACKET
MOTOR
1) Unscrew and remove 2 screws on
totakeapartBracketMotor.(Use+
Screw Driver)
9 Heat Exchanger 1)PurgetheRefrigerantrst.
2)Unscrewthexscrew.
3) Separate the pipe from the En-
trance and Exist by using a welder.
4) Separate Heat Exchanger from
Unit.
Caution: When removing the
Compressor, Heat Exchanger, and
Pipe, Purge the Refrigerant inside
the Compressor completely and re-
movethepipewithaweldingame.