Samsung AR18CSFCMWKNCV - Page 47

47
No. Parts Procedure Remark
4 Outdoor Unit
Guard
1) Pull out the sensor from
the Outdoor Unit Guard and
separate it.
2) Remove the 4 screws which is
xedtoOutdoorUnitGuardand
separateit.(Use+ScrewDriver)
5 Cabinet Rear RH 1) Pull out the sensor from the
Cabinet Rear RH and separate it.
2) Remove the 4 screws which
isxedtoeachsideofCabinet
RearRHandseparateit.(Use+
Screw Driver)
6 Cabinet-
Installation Rear
Part
Remove the 1 screw from the
Cabinet- Installation Rear Part
andseparateit.(Use+Screw
Driver)