48
No. Parts Procedure Remark
7 Cabinet Front LF 1) Unscrew and remove 8screws
on Cabinet-Front LF. (Use
+ScrewDriver)
8 Fan 1)Removetheonexingnut
like the picture on the right side.
(Use Hexagon Wrench, Monkey
Spanner, Hexagon Socket)
9 Motor 1) Separate the Fan Propeller.
2) Remove the 4 screws which
isxedtoMotor.(Use+Screw
Driver)
3) Separate the Motor Wire
connector from the Outdoor
Unit Control Part
To Next Page
Loading...