3-8 Samsung Electronics
Press the Mode Selection key to set the display part and check the display part.
ė
The display part shows like below when each time you press Mode button.
Step 6
Upon completion of the selection, check you made right selections.
Step 7
Pressing the ON/OFF button ( ).
When pressing the operation ON/OFF key with the direction of remote control for unit, the sound ’’Ding’’ or ’’Diriring’’ is hea
and the OPERATION ICON(
) lamp of the display is flickering at the same time, then the input of option is completed.
(If the deriving sound isn’t heard, try again pressing the ON/OFF button.)
Step 8
Unit operation test-run.
First : Remove the battery from the remote control.
Second : Re-insert the battery into the remote control.
Third : Press ON/OFF key with the direction of remote control for set.
Ƶ Error mode
1. If all lamps of indoor unit are flickering, Plug out, plug in power plug again and press ON/OFF key to retry.
2. If the unit is not working properly or all lamps are continuously flickering after setting the option code, see if the c
orrect option code is
set up for its model.
ƶ Option Items
Model 1-6 7-12 13-18 19-24 25-30 31-36 37-42 43-48
AR18HSFNBWK/EU 010005 176A0A 27323C 372634 034A40 103E49 200000 300000
AR18HSSDBWK/EU 010045 196A38 27323C 371634 033F3E 102C36 200000 300001
AR24HSSDBWK/EU 010045 156A5C 274450 372634 03454F 10424A 200000 300000
AR24HSFNBWK/EU 010005 156A5C 274450 372634 03454F 10424A 200000 300000
AR24HSFSRWK/ER 010005 15625C 274450 372604 03454F 10424A 200000 300000
AR24HSFNRWK/ER 010005 15625C 274450 372604 03454F 104
24A 200000 300000
AR18HSFSRWK/ER 010005 17620A 27323C 372604 034A40 103E49 200000 300000
AR18HSFNRWK/ER 010005 17620A 27323C 372604 034A40 103E49 200000 300000
AR24FSFNAWKNFA 010005 15625C 27444E 372604 03454F 10424A 200000 300000