4-15
NO. Parts Procedure
Remark
3Assy
Control Out
ߣ࣒ƟͱθʪͱЭʪϩ˵ʪAͱЭʪθʀͱϩθͱɵͱуࡤ
Pull the motor wire to allow
sufficient space as shown on the
right side and then remove the
screw.
2) Detach several connectors from
the Assy Control Out.
3) Detach several connectors from
the PCB of Assy Control Out.
1) Release the refrigerant at first.
2) Loosen screw on both sides.
3) Disassemble the pipes in both
inlet and outlet with welding torch.
ߦ࣒Uʪϩɇʀ˵ϩ˵ʪ²ʪɇϩkуʀ˵ɇ˝ʪθ
To Next Page
Loading...
