Using the Quiet function
You can reduce the noise generated from the indoor unit during Cool/Heat mode.
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
1. Press the Options button.
2. Press the
, or Options button until (Quiet) indicator starts to blink.
3. Press the SET button to set the Quiet function.
- (Quiet)(Quiet) indicator will be displayed on the remote controller display and
Quiet function will begin.
Cancel
f Press the Options button Press the , or Options button to
make the (Quiet) indicator blink and press the SET button.
Additional options available in Quiet function
You can adjust the set temperature by 1 °F within the range of
61°F~86°F (16°C~30°C).
Fan speed is set to (Auto).
Vertical/Horizontal air swing can be selected.
t Quiet function is only available in Cool/Heat mode.
t If the Quiet function is selected while 2-Step Cooling/Fast /Comfort/
Single user/
function is on, corresponding function will
be cancelled.
English-23
OPTIONS04
AR7000 CV HP_IB&IM_DB68-05637A-00_EN.indd 23 2015/10/12 15:43:05
To Next Page
Loading...
