Samsung AS07A6MA - Getting Started

E-
7
ENGLISH
INSTALLING THE
INDOOR UNIT
Fixing the Installation Plate
Before fixing the installation plate to a wall or window frame, you must
determine the position of the inch(65mm) hole through which the cable,
piping and hose pass to connect the indoor unit up to the outdoor unit. When
facing the air conditioner in position on the wall, the piping and cable can be
connected from the:
1 Determine the position of the pipe and drain hose hole using the right figure and drill
the hole with an inner diameter of inch(65mm) so that it slants slightly downwards.
2 If you are fixing the indoor unit to a... Then follow Steps...
Wall 3.
Window frame 4 to 6.
3 Fix the installation plate to the wall in a manner appropriate to the weight of the indoor
unit.
➢ If you are mounting the plate on a concrete wall with anchor bolts, the anchor bolts
must not project by more than inch(20mm).
4 Determine the positions of the wooden uprights to be attached to the window frame.
5 Attach the wooden uprights to the window frame in a manner appropriate to the weight
of the indoor unit.
6 Using tapped screws, attach the installation plate to the wooden uprights, as illustrated
in the last figure opposite.
2
9
16
3
4
2
9
16
◆ Right
◆ Left
◆ Rear (right or left)
(30)1
3
16
(65)0
Pipe Hole
2
9
16
10(252)
11
(275)
5 (140)
1
2
3(90)
5
8
2
(60)
3
8
1
(30)
3
16
(410~730)
16
~
1
8
28
3
4
Installation plate
Unit : inch(mm)
Unit : inch(mm)
Unit : inch(mm)