If the atmosphere in your room is stale, you can air the room using
the Fan feature.
1
If necessary, press the button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in Cool mode with
Turbo fan speed.
The indoor unit beeps.
2
If the is not displayed at the top of the remote control,press the
button on the remote control one or more times until it appears.
Result:
The indoor unit beeps each time you press the button.
The air conditioner runs in the Fan mode.
The temperature is set automatically.
Note
You can change modes at any time.
3
Select the fan speed by pressing the button one or more times
until the required setting is displayed:
Low
Medium
High
Result:
Each time you press the
button, the indoor unit beeps.
4 To control the direction of the air flow, refer to page 13.
Airing Your Room
To Next Page
Loading...
Need help?
General
