Disassembly and Reassembly
Samsung Electronics4-7
No Parts Procedure Remark
3
4
5
Common Work
Heat
Exchanger
Compressor
1) Loosen the fixing screws of the
Bracket Motor.
1) Loosen 2 fixing screws on both sides.
2) Disassemble the pipe in both inlet and
outlet with welding torch.
3) Detach the Heat Exchanger.
1) Loosen the Nut to open the Terminal
Cover.
2) Disassemble the Cloth Sound Felt.
3) Disassemble the pipe in both inlet and
outlet of the Compressor with welding
torch.
4) Loosen 3 bolts at the bottom of the
Compressor.
5) Detach the Compressor.
24610A(1)_1 11/10/05 6:26 PM Page 3-14
To Next Page
Loading...
