To Next PageTo Next PageWhy is my Samsung AW128AA Air Conditioner blowing air but not cooling?
If your Samsung Air Conditioner is blowing air but not cooling, it could be due to a clogged or dirty air filter. Another reason might be that the desired temperature is set too high; try setting it lower than the current temperature. Also, ensure that the unit is not in "FAN" mode.
What to do if my Samsung AW128AA Air Conditioner remote is not working?
If your Samsung Air Conditioner remote isn't working, first, check if the batteries are completely depleted or not properly inserted. Also, make sure that the receiving window of the remote for the assembly main PCB is not blinded. Another possible cause is jamming due to a nearby neon sign.
Why is my Samsung Air Conditioner not operating?
If your Samsung Air Conditioner is not operating, check for a power failure or if the power plug is pulled out. Also, check if the unit stopped because the sleep time has completed. If not, pull out the power plug for ten seconds and then reinsert it.
General| Model | AW128AA |
|---|---|
| Cooling Capacity | 12000 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Net Weight | 32 kg |
| Outdoor Unit Dimensions (H x W x D) | 540 x 790 x 255 mm |
Details main unit dimensions, views, and remote control layout.
Covers the process of installing the air conditioner, including location selection.
Explains cooling, fan, energy saver, sleep, LED indications, and panel operations.
Explains the function of each button on the remote control.
Step-by-step guide for replacing the compressor.
Procedures for checking and replacing refrigerant oil.
Detailed steps for disassembling Type "A" models.
Continuation of disassembly procedures for Type "B" models.
Initial checks to perform before detailed troubleshooting.
Guides for diagnosing and resolving issues like no power, remote failure, compressor, fan, and swing motor problems.
Exploded view and parts list for Type "A" and "C" main units.
Exploded view and parts list for Type "B" main unit.
Exploded view and parts list for the control assembly.
Illustrates the refrigerant flow within the unit.
Overview of the unit's structure, micom control diagram, and pin assignments.
Diagram of the main Printed Circuit Board assembly.
Schematic diagram for the main PCB.
Schematic diagram of the remote control unit.
