To Next PageTo Next PageHow to fix a Samsung DVD Player remote control that isn't working?
If your Samsung DVD Player remote control isn't working, try these steps: First, check and replace the batteries. Then, ensure you are within 6.1 meters of the unit. If it still doesn't work, remove the batteries, press and hold any button for several minutes to reset the remote's microprocessor, then reinstall the batteries and try again.
What to do if there is no audio from my Samsung DVD Player?
If you're not getting any audio from your Samsung DVD Player, make sure you have selected the correct Digital Output in the Audio Options Menu.
Why won't my Samsung DVD Player play the disc?
If your Samsung DVD Player won't play the disc, first ensure that the disc is installed with the label side facing up. Then, check the region number of the Blu-ray/DVD disc to confirm it is compatible with your player.
How to fix noisy or distorted picture on Samsung DVD Player?
If the picture on your Samsung DVD Player is noisy or distorted, make sure that the disc is not dirty or scratched. If it is, clean the disc.
What to do if I forgot the PIN for my Samsung DVD Player?
If you forgot the PIN for your Samsung DVD Player, press and hold the ' button on the top panel for more than 5 seconds with no disc inside on the home screen. This will revert all settings, including the PIN, to the factory defaults. Be aware that all stored user BD data will be deleted.
Why does video play intermittently on my Samsung DVD Player?
If video playback is intermittent on your Samsung DVD Player, check if the network is stable and the network cable is properly connected, ensuring the network isn't overloaded. If you're using a wireless connection, verify its stability.
How to troubleshoot no HDMI output on a Samsung DVD Player?
To troubleshoot no HDMI output on your Samsung DVD Player, check the connection between the TV and the HDMI jack on the player. Also, verify that your TV supports the HDMI input resolution (576p, 720p, 1080i, 1080p).
What to do if the screen is blocked on my Samsung DVD Player?
If the screen is blocked on your Samsung DVD Player, press the ' button on the top panel for more than 5 seconds with no disc inside on the home screen. This will revert all settings to the factory defaults. Note that all stored user BD data will be deleted.
Why can't I connect my Samsung DVD Player to the BD-Live server?
If you cannot connect to the BD-Live server with your Samsung DVD Player: * Check your network connection status in the Network Status menu. * Ensure a USB memory device with at least 1 GB of free space is connected. * Verify the BD-Live Internet Connection menu is set to Allow(All).
How to fix unstable network connection between Samsung DVD Player and PC?
If the network connection between your Samsung DVD Player and PC is unstable, check if you have a firewall enabled. If so, disable the firewall function. Also, ensure that the IP addresses under the same subnetwork are unique to avoid IP interference.
General| Brand | Samsung |
|---|---|
| Model | BD-H8900M |
| Category | Blu-ray Player |
| Language | English |
