Why won't my Samsung CE118KFR accept key inputs?
If your Samsung Microwave Oven does not accept key input (program), it could be due to: * Key input not being in sequence. * Open or loose connection of the membrane keypad to the Ass'y PCB. * Shorted or open membrane panel. * Defective Ass'y PCB. Refer to the operation procedure and replace the PCB main.
Why does my Samsung CE118KFR program but the timer won't start?
If your Samsung Microwave Oven can be programmed, but the timer doesn't start, it may be due to open or loose wiring of the secondary interlock switch, off-alignment of the primary interlock, or a defective secondary interlock S/W. Adjust the door and interlock switches.
Why is the turntable in my Samsung Microwave Oven not rotating?
If the turntable motor in your Samsung Microwave Oven does not rotate, it could be due to open or loose wiring of the turntable motor, or a defective turntable motor. Check the wire of the turntable motor and replace the turntable motor if necessary.
Why is my Samsung Microwave Oven sparking?
Sparks in your Samsung Microwave Oven can occur if metallic ware or cooking dishes are touching the oven wall. Also, ceramic ware trimmed with gold or silver powder can cause sparks. Avoid using any type of cookware with metallic trimming.
Why is my Samsung Microwave Oven cooking slowly?
If your Samsung Microwave Oven takes longer to cook food, it could be due to a decrease in power source voltage, open or loose wiring of the magnetron filament circuit (leading to intermittent oscillation), or the aging of the magnetron. It's recommended to consult an electrician to check the power source.
Why is my Samsung CE118KFR making a loud buzzing noise?
A loud buzzing noise from your Samsung Microwave Oven can be caused by loose fan and fan motor screws, loose screws on the H.V.Transformer, or a shorted H.V.Diode. Try tightening the screws of the fan motor and the H.V.Transformer. If the noise persists, replace the H.V.Diode.
What to do if my Samsung Microwave Oven is dead but the fuse is OK?
If your Samsung Microwave Oven is completely dead (no display, no operation) but the fuse is okay, the cause could be: * An open or loose lead wire harness. * An open thermal cutout (Magnetron). * An open low voltage transformer. * A defective Ass'y PCB. Check the fan motor if the thermal cutout is defective. Check the Ass'y PCB if the LVT is defective.
What to do if my Samsung CE118KFR has no display and the fuse is blown?
If your Samsung Microwave Oven has no display and no operation, and the fuse is blown, it could be due to: * A shorted lead wire harness. * A defective primary latch switch. * A defective monitor switch. * A shorted HV Capacitor. * A shorted HV Transformer. Check the adjustment of the primary, interlock monitor, and door sensing switch.
Why does my Samsung CE118KFR stop during cooking?
If your Samsung Microwave Oven stops operating during cooking, it could be due to open or loose wiring of the primary interlock switch or the operation of the thermal cutout (Magnetron). Adjust the door and latch switches.
How to fix uneven cooking in Samsung CE118KFR?
Uneven cooking in your Samsung Microwave Oven can be due to the uneven intensity of microwaves. To mitigate this, wrap thinner parts of the food with aluminum foil, use plastic wrap or cover with a lid, and stir once or twice while cooking foods such as soup, cocoa, or milk.
General safety precautions and warnings for servicing microwave ovens.
Specific safety measures for technicians during microwave oven servicing.
Critical safety warnings related to high voltage components and procedures.
Detailed technical specifications for the microwave oven model.
Comparison of various cooking modes and features for the model.
Overview and explanation of the microwave oven's control panel buttons and functions.
Diagrams and descriptions of the microwave's external features and dimensions.
Step-by-step guide for replacing key internal components.
Instructions for safely replacing the high voltage transformer.
Detailed steps for removing and replacing the microwave oven door and its parts.
Procedure for replacing the internal fuse of the microwave oven.
Instructions for replacing the drive motor for the turntable.
Steps for safely removing and replacing the main control circuit board.
Procedures for checking continuity of the high voltage transformer terminals.
Steps for checking continuity of the low voltage transformer.
Guidance on checking magnetron filament and case continuity for faults.
Instructions for checking the continuity and resistance of the HV capacitor.
Procedure for checking the front-to-back resistance of the HV diode.
Steps for checking continuity of main and power control relays.
Procedures for adjusting and checking safety interlock switches.
Method for measuring magnetron output power using a water temperature rise test.
Procedure to check microwave heat distribution and evenness.
Detailed steps for measuring microwave energy leakage using a survey meter.
Specific steps for checking microwave leakage, potentially a repeat or subset of 5-10.
Important considerations and tips for accurate microwave leakage measurement.
Procedure for recording and reporting microwave leakage measurement results.
Troubleshooting guide for electrical issues, symptoms, causes, and corrections.
Diagrams showing the internal and external components of the microwave.
Detailed list of main parts with part numbers and descriptions.
Specific exploded view and parts list for the microwave door assembly.
Specific exploded view and parts list for the control panel components.
Specific exploded view and parts list for the external casing parts.
List of standard screws, nuts, and other common hardware parts.
Diagrams illustrating the printed circuit board layouts.
List of components found on the printed circuit boards.
Electrical schematic diagrams for the microwave oven's circuits.
General| Brand | Samsung |
|---|---|
| Model | CE118KFR |
| Category | Microwave Oven |
| Language | English |
To Next Page
