Samsung CLP-325 Series - Lsu; Holder Pad

Disassembly and Reassembly
Service Manual
3-12
Samsung Electronics
3.4.7 LSU
1. To remove the LSU from the bottom of the SET,
rst remove the harness cover after remove the
2 screws. And remove the 3 screws.
2. Release the LSU unit after remove the 2 Flat
cable.
Harness coverHarness cover
Harness coverHarness cover
3.4.8 Holder Pad
1. Remove the sub PBA. And release the Guide
Pick up unit after remove the 4 screws.
2. Release the holder pad after remove the hook
of both side.