Samsung CLP-325 Series - Page 59

Alignment & Troubleshooting
Service Manual
4-4
Samsung Electronics
■ Wireless LED
WIRELESS LED STATUS DESCRIPTION
Blue Off
Wireless network is disconnected.
On
Wireless network is connected.
Slowly blinks
The machine starts connecting to a wireless network.
Quickly blinks
• The machine is connecting to access point (or wireless router).
• Wireless network connection is being disconnected.
4.1.1.3 Introducing the useful buttons
■ Print screen button (CLP-320(K)/CLP-321/CLP-325(K)/ CLP-326 only.)
By pressing the Print screen button, you can do the following functions.
FUNCTION DESCRIPTION
Printing the active window Press this button and the green LED will start blinking. When the green
LED stops blinking, release the button.
Printing the whole monitor screen Press this button and the green LED will start blinking. Release the
button while it’s blinking.
■ Demo print button (CLP-320N(K)/CLP-321N only.)
It prints a demo page by pressing this button only. The printed page shows the color print quality potential
and overall print characteristics of the machine.
■ Cancel button
By pressing the Cancel button, you can do the following functions.
FUNCTION DESCRIPTION
Printing demo page In ready mode, press and hold this button for about 2 seconds until the
status LED blinks slowly, and release.
Printing conguration sheets In ready mode, press and hold this button for about 5 seconds until the
status LED blinks quickly, and release.
Canceling print job Press cancel button during printing. The red LED blinks while the print
job is cleared from both the machine and the computer and then the
machine returns to ready mode. This may take some time depending on
the size of the print job.