Samsung CLP-550 - Step 7. Printing a Demo Page; Step 8. Changing the Display Language

S ETUP G UIDE
23
English
Step 7. Printing a Demo Page
Print a demo page to make sure that the printer is operating
correctly.
In ready mode, press and hold the Upper Level button ( ) on
the control panel for 2 seconds to print a demo page.
A demo page showing the printer’s features and capabilities
prints out.
Step 8. Changing the Display Language
To change the language that is displayed on the control panel,
take the following steps:
1 In ready mode press the Menu button ( ) on the control
panel until you see ‘Setup’ on the bottom line of the display.
2 Press the Enter button ( ) to access the menu.
3 Press the Enter button ( ) when ‘LCD Language’ displays
on the bottom line.
4 Press the scroll button ( or ) to display the language
you want to use.
5 Press the Enter button ( ) to save the selection.
6 Press the On Line/Continue button ( ) to return to
ready mode.