U
SING
P
RINT
M
ATERIALS
3.20
Printing on Preprinted Paper
• Preprinted paper is paper that has some type of printing
placed on it before it is sent through the printer (paper that
has a preprinted logo at the top of the page, for example).
• Letterhead must be printed with heat-resistant ink that will
not melt, vaporize, or release hazardous emissions when
subjected to the printer’s fusing temperature of 180°C
(356°F) for 0.1 seconds.
• Ink on letterhead must be non-flammable and should not
adversely affect any printer rollers.
• Forms and letterhead should be sealed in moisture-proof
wrapping to prevent changes during storage.
• Before you load preprinted paper, such as forms and
letterhead, verify that the ink on the paper is dry. During the
fusing process, wet ink can come off of preprinted paper,
reducing the print quality.
To print on preprinted paper:
1
Open the Multi-purpose Tray and unfold the paper support.
2
Load letterhead only in the Multi-purpose Tray with the
print side down and the top, short edge, in first.
Adjust the guide to fit the width of the paper stack.
To Next Page
Loading...
Need help?
General
