P
RINTING
F
ROM
DOS A
PPLICATIONS
D.8
Job Tab
You can set options for improving the quality of your print job.
• Paper Type provides the printer with information about the
type of paper to be used for a print job. For the best result,
set this to the paper type you loaded in the tray of the printer.
When using the plain paper, set this to Printer Default.
• Time out determins the amount of time (in seconds) the
printer will wait before printing the last page of a print job
that does not end with a command to print the page or a
formfeed character. You can set it from 0 to 300 seconds.
To Next Page
Loading...
