I
NSTALLING
P
RINTER
O
PTIONS
F.12
9
Plug one end of the Ethernet cable into the Ethernet
network port on the Printer and the other end of the cable
into a network LAN connection.
10
Connect the network cable, reconnect the power cord and
then turn the printer on.
NOTE
: For information about configuring and using the printer in
a network environment, refer to the User’s Guide provided with
the network interface card. You can also configure the network
parameters using the control panel; see page E.6.
To the network
LAN connection
To Next Page
Loading...
