S
ETUP
G
UIDE
9
English
6
Hold the handle on the imaging unit with the green roller
facing you. Align the imaging unit with the slots in your
printer so that the colors on both sides of the imaging unit
slide into the corresponding colors of the slots.
CAUTION
:
Insert the imaging unit carefully so as not to scratch
and damage the surface of the green roller.
7
Slide the imaging unit down into the printer until it cannot
be pushed in any further and fold the handle down.
CAUTION
:
To prevent damage, do not expose the imaging unit to
light for more than a few minutes. Close the top and left cover
should the setup need to be halted for any reason.
To Next Page
Loading...
