Media and tray
55
2. Menu Overview and Basic Setup
(●: Supported, Blank: Not supported)
Envelope
Printing successfully on envelopes depends upon the quality of the envelopes.
To print an envelope, place it as shown in the following figure.
• When selecting envelopes, consider the following factors:
- Weight: should not exceed 90 g/m
2
otherwise; jams may occur.
- Construction: should lie flat with less than 6 mm curl and should not
contain air.
- Condition: should not be wrinkled, nicked, nor damaged.
- Temperature: should resist the heat and pressure of the machine
during operation.
• Use only well-constructed envelopes with sharp and well-creased folds.
• Do not use stamped envelopes.
• Do not use envelopes with clasps, snaps, windows, coated lining, self-
adhesive seals, or other synthetic materials.
• Do not use damaged or poorly made envelopes.
Cotton ●●
Recycled ●● ●
Archive ●● ●
Letterhead ●● ●
Punched ●● ●
Glossy Photo ●● ●
a. CLX-626xND /CLX-626xFD /CLX-626xFR /CLX-626xFW Series only.
Types Tray 1
Optional tray
a
Manual feeder/ Multi-
purpose tray
CLX-419xN/ CLX-419xFN Series
CLX-419xFW Series
CLX-626xND/ CLX-626xFD Series
CLX-626xFR/ CLX-626xFW Series
To Next Page
Loading...
