Samsung CM1099 Series - 4 Disassembly and Reassembly; Disassembly of Magnetron, Motor Assembly and Lamp

9
4. Disassembly and Reassembly
Parts Explaination Photo Explaination
Magnetron,
Motor Assembly
and Lamp
1. Disconnect all lead wires from
the magnetron and lamp.
2. Remove a screw securing air
cover.
3. Remove the air cover.
4-1 Disassembly of Magnetron, Motor Assembly and Lamp
Remove the magnetron including the shield case, permanent magnet, choke coils and capacitors (all of which
are contained in one assembly)